Model No.: NPM-TT
Packaging: Vacuum packing in wooden cases
Port: Hong Kong
NPM-TT twin tray assembly platform
1.Introducing the latest NPM platform for expanding and evolving electronics assembly requirements, the NPM-TT (Next Production Modular-Twin Tray) takes its place alongside Panasonic`s other award-winning models.
2.The electronics assembly machine processes boards up to 510 x 590 mm, thus expanding the SMT process to accommodate more tray-supplied parts in full independently-run-lane mode. Its dual lane functionality enables one or two products or two different products to be assembled at the same time. The optimal solution for both high-mix/ low-volume and low-mix/high-volume manufacturing.
3.While the machine is operating, the trays can also be used offline to enable the subsequent product to be set up. This saves on changeover time and optimises efficiency.
4.As well as accommodating tape and tray on both sides, the NPM-TT also combines in-line PoP to a NPM-D line and shares common feeders across the complete NPM platform.
1.Take advantage of the outstanding advantages offered by the dual-lane platform
2.(01005) 0402 chip to 120L x 90W x 28T to BGA up to 80 x 80 part range
3.Capable of processing up to 20-trays and 26 fixed tape and reel inputs for each side for a total of 92 available inputs
4.Offers compatibility with CM and NPM-D series intelligent feeders and nozzles
5.Flexible feeder/tray positions
Features & Benefits
Selectable specifications for the supply unit
Placement head (8- &3-nozzle head)
Alternate/independent placement support
Capable to directly link with NPM-D
APC system is supported (Option)
High productivity through fully independent placement
Support Pin Automatic Change (option)
Transfer Unit (option)
Feeder location free
|Single-lane mode||L 50 x W50 ~ L 510 x W 590|
|Dual-lane mode||L 50 x W50 mm ~ L 510 x W 300 mm|
|Single-lane mode||4.0 s (With no component mounted on the reverse side of PCB)|
|Dual-lane mode||0 s *No 0s when cycle time is 4.0 s or less|
|Electric source||3-phase AC 200, 220, 380, 400, 420, 480 V 2.5 kVA|
|Pneumatic source *1||Min.0.5 MPa, 200 L /min (A.N.R.)|
|Dimensions *1 (mm)||W 1 300*2 x D 2 798*3 x H 1 444*4|
2 650 kg
(Only for main body:This differs depending on the option configuration.)
( With Dual Heads )
3-nozzle head *5
( With Dual Heads )
|Placement speed||36 000cph (0.1s/chip)||
14 400 cph (0.25 s/chip)
11 000 cph (0.33 s/QFP)
± 40 µm/chip
± 30 µm/QFP
± 50 µm/QFP
|± 30 µm/QFP|
|(01005") 0402 chip*6 to L 32 x W 32 x T 12||(0201") 0603 chip to L 150 x W 25 (diagonal152) x T 28|
|Taping||Tape : 8 to 56 / 72 mm||Tape : 8 to 56 / 72 / 88 / 104 mm|
Specifications for front/rear tray feeders : Max.52
Specifications for front/rear feeder carts : Max.120
( 8 mm tape : double feeder, (small real) )
Specifications for front/rear tray feeders : Max.6
Specifications for front/rear feeder carts : Max.14
|Tray||Max.40 sheets (Front supply unit : Max. 20 sheets + Rear supply unit : Max. 20 sheets)|
*1 : Only for main body
*2 : 1 820 mm in width if extension conveyors (260 mm) are placed on both sides
*3 : Dimensions shown are specifications for front/rear tray feeders . Dimensions of specifications for front/rear feeder carts : 2 893 mm
*4 : Excluding monitor and signal tower
*5 : 3-nozzle head cannot be installed on NPM-D
*6 : The 0402 chip requires a specific nozzle/feeder.
*Value such as maximum speed and placement accuracy may vary depending on operating conditions.
*Please refer to the specification booklet for details.
Shenzhen Keith Electronic Equipment Co., Ltd." located in Baoan District, Shenzhen. It is a supplier of AI and SMT equipment, spare parts, consumables and auxiliary consumption materials in China. Over the years, we have provided advanced equipment and parts for our customers to ensure high-quality service. And for exporting market, we are planing to developing Europe, North America, South America, Southeast Asia,India and where need SMT equipment spare parts.
Business philosophy: cooperation, win-win, innovation, mutual assistance
We have been adhering to the brand management concept of "focusing on product quality and customer needs", through the implementation of open innovation, excellent operation management, human resources development and other strategies, to comprehensively construct the core competitiveness of the company, create customer and social values, and win the unanimous praise of the vast number of customers and society.
Panasonic Insertion Machine, Panasonic Insertion Machine Parts, Panasonic Placement Machine, Panasonic Placement Machine Parts, Panasonic Feeder & Feeder Parts, Feeder Trolley, SMT Squeegee etc. To learn more about our products, please contact us through the following email address, look forward to your cooperation!